#082 The Smart Phone Gantry 2 lanes or 4 lanes (Any Scale)

#082 The Smart Phone Gantry,

2 Lanes Version Ready for Dispatch now…

4 Lanes Version Pre order now for dispatch by Friday 3rd November 2023

 

2 Lanes Version information (Could be used for 4 lanes of 1:64 Track)

This gantry will hold most Smart phones so you can use them as a lap counter for your 2 lane track or rally stage

Its wide enough to go over a piece of Carrera track which is the widest of them all,

The Gap is 209mm, the overall width of the gantry is 289mm

Its 197mm tall, and 80mm deep, not including the feet that are 120mm

Will hold phones upto 180mm x 72mm

Th part that holds the smart phone has 2 pieces that can be moved to hold your phone in the same place every time,

And that part can be completely removed if you are not using it and don’t want to spoil the look of your circuit.

There are holes in all the right places for you to feed a charging lead up on of the towers and over to the phone.

The Chequer sign on the front is option, as is the etching of the 10 start lights, so there is plenty of scope for you to make it your own with your own little touches.

The kit also comes with a Pirelli sign for the same place if you don’t want the chequered flag board.

Here is a video about the 2 lane version

4 Lanes information 

The Gap is 424mm, the overall width of the gantry is 504mm

Its 273mm tall, and 80mm deep, not including the feet that are 120mm or 160mm you have a choice

Will hold phones upto 260mm x 78mm

It is wide enough to span 4 lanes of Carrera track without borders.

Here is a video about the 4 lane version

 

 

NO SMART PHONE COMES WITH THIS KIT, THIS KIT IS DESINGED FOR YOU TO USE YOUR OWN PHONE,

THIS COMES AS A FLAT PACKED MDF KIT FOR YOU TO BUILD AND PAINT IF YOU WANT TOO,
FULL INSTRUCTIONS ARE ONLINE TO SAVE PAPER

Link to the instructions CLICK HERE
Your password is on the product label, also normally etched into the first piece of MDF