Our Small Curved Spectator Stands come as a pair. They are only three tier and therefore have a low height. This makes them ideally suited for placement in the centre of a slot car track as they tend to obscure the race track much less. The models are robust and although look intricate are in fact very straight forward to build. This is in part due to the interlocking nature of the design. The support structure are the rear of the stands are also accurately modelled and visible from the front through the slatted seats. Because they look so realistic even unpainted they are an ideal first build.
These curved stands have the same profile each end as the straight version so can be used in conjunction with the 012 straight stands.
Each stand curves through 22.5 degree’s so to make a 180 degree circle you would need 8 of them.
They sit nicely on the outside of Scalextric Radius 2 track pieces.
We will add to the phots as we get them to show you them on peoples tracks to give you an idea of the size and use of them.
These are a little harder to put together than the straight version but the detailed instructions make it a lot easier that you might think. If you have built some of our other products already you should have no issues. If this is your first one, they make sure you take your time and read the instructions fully.
Comes as an unpainted laser cut kit for you to build and paint yourself, with full detailed step by step instructions.
THIS COMES AS A FLAT PACKED MDF KIT FOR YOU TO BUILD AND PAINT IF YOU WANT TOO,
FULL INSTRUCTIONS ARE ONLINE TO SAVE PAPER
Link to the instructions CLICK HERE
Your password is on the product label, also normally etched into the first piece of MDF
Reviews
There are no reviews yet.