#055 Marshal Post 1:32, 1:43 & 1:24 Scale

(1 customer review)

£14.95£19.95

Our 1:32 Scale tall marshal post MDF Model Kits, is perfect to help your marshals see all the action and show the flags they need to,

It has a tiny foot print so can go almost anywhere. Each post can be numbered and every kit come with numbers 1 to 8 so you can keep an eye of the whole track with multiple marshal posts.

Come with a FREE flag waving figure, so you don’t need to go anywhere else to find one.

SCROLL DOWN FOR MORE DETAILS

Our 1:32 & 1:24 Scale tall marshal post MDF Model Kit, is perfect to help your marshals see all the action and show the flags they need to,

It has a tiny foot print so can go almost anywhere. Each post can be numbered and every kit come with numbers 1 to 8 so you can keep an eye of the whole track with multiple marshal posts.

Come with a FREE flag waving figure, so you don’t need to go anywhere else to find one.
Sometimes the Flag can snap off in the post, we do our best to send it so it does not, but we can not guarantee it wont, but dont worry is will super glue back on very easily.
The letters and symbols of the advert come separate so its really easy to to paint them first then stick them on. if you don’t want the advert on there and would like to create your own, the kit comes with blank panels to use instead.

Dimensions 1:32 scale

Height: 180mm
Width:  73mm
Depth:  65mm

The size of the base is

Width: 70mm
Depth: 75mm

 

 

Dimensions 1:43 scale details coming soon

Height: xxxmm
Width:  xxmm
Depth:  xxmm

The size of the base is

Width: xxmm
Depth: xxxmm

 

Dimensions 1:24 scale

Height: 240mm
Width:  97mm
Depth:  87mm

The size of the base is

Width: 93mm
Depth: 100mm

 

But it can be used with out the base if you sink it into your scenery.

Easy to build with detailed instructions.

THIS COMES AS A FLAT PACKED MDF KIT FOR YOU TO BUILD AND PAINT IF YOU WANT TOO,
Kit is for one marshal stand, with one resin printed flag waving marshal, in the same scale as the building you choose.

FULL INSTRUCTIONS ARE ONLINE TO SAVE PAPER

Link to the instructions CLICK HERE
Your password is on the product label, also normally etched into the first piece of MDF

Sometimes the Flag can snap off in the post, we do our best to send it so it does not, but we can not guarantee it wont, but dont worry is will super glue back on very easily.

 

 

Scale

1:32 (Standard Slot Car Size), 1:24, 1:43

1 review for #055 Marshal Post 1:32, 1:43 & 1:24 Scale

  1. Tara King

    I was bought this for Christmas and it was an amazing gift.
    The marshal post is small enough even for the smallest layout and those awkward corners that you don’t have a lot of space in. You could use it with or without the base if you have a permanent layout and model it into a hillside etc.

    I found the lugs very tight so make sure you do a dry run first before gluing. The instructions for this are mainly photographic so make sure you position the flag stand in the correct place (you need to make sure that the roof posts fit in the marshal post correctly.) It does flex a little but if positioned incorrectly it won’t fit. I made flags for the flag stand to make it look more realistic. I also painted it as I built it. I find it easier to do it that way. The Dunlop lettering and symbol in particular are easier to paint before gluing them in place. There are blank sides also just in case you want to make your own branding, as well as other numbers for the posts just in case you want more than one😉
    I did use the base for my marshal post . I grassed it and put longer grasses near the posts.

Only logged in customers who have purchased this product may leave a review.

You may also like…