Before the words ‘Health’ and ‘Safety’ were ever used in the same sentence, a wooden spectators stand was a regular site at many motor circuits. The crowd would happily watch the mayhem and endlessly add half extinguished cigarette stubs to the pile of litter below! Our kit is perhaps a more robust construction and although looks intricate is in fact very straightforward to build. This is in part due to the interlocking nature of the design. As well as the tiered seating for 40 spectators, the support legs at the rear are also accurately modelled and visible through the slatted seats.
The 1/32 model is 244mm Wide x 153mm Deep x 138mm High
TheĀ 1/43 modelĀ is 184mm Wide x 114mm Deep x 103mm High
The 1:64 model is 122m Wide x 76mm Deep x 69mm High
THIS COMES AS A FLAT PACKED MDF KIT FOR YOU TO BUILD AND PAINT IF YOU WANT TOO,
FULL INSTRUCTIONS ARE ONLINE TO SAVE PAPER
Link to the instructions CLICK HERE
Your password is on the product label, also normally etched into the first piece of MDF
